Performance Kits

Maxiflow Filter System

Technically designed and developed to increase the air flow maximising the engine's performance. The engineered design of the housing in combination with internal filter utilises the cold air flow and in turn provides your engine with more power and torque. At the same time the Max Flow filter system gives you an improved engine bay look and a superb induction roar. Cold air ducting kit included

Pro Ram Induction Kit

Maximum Airflow    Increased Performance Pro-Ram kits enhance your power and acceleration. Pro-Ram Direct Induction Kits are designed to replace the complete OE aircleaner assembly, within the engine compartment space allowed by removal of the airbox. The filter element utilises the spun aluminium trumpet with its advanced bellmouth design for optimum airflow and each kit comes complete with the silicone hoses, brackets and adaptors necessary for a straightforward DIY installation.

SupaRam Induction Kit

Cold Air Induction Kit Kit replaces the Air Box Minimum Restriction Filter is cleanable/reusable  Increased Performance Kits contain all the brackets, adapters, nuts and bolts that you will need. Each Kit also contains the exact amount of cold air ducting that is recommended for the car. This ducting complements the kit and directs 'fresh' cold air to your filter. An aspect that is often over looked by other manufacturers, cold air being more dense and containing plenty of oxygen, lets your engine breathe!

Direct Replacement Filters

A range of filters designed to be inserted into the vehicle's own airbox in place of the manufacturer's original, as part of a normal service. Manufactured from high-flow polyurethane Aeriform® filter material, different grades being laminated together to give progressive air cleaning throughout the volume of the filter. The material is impregnated with our unique dirt retention polymer to enhance the capture of dirt particles. Increased engine power (up to 5%) Fits the existing airbox Greater filtration efficiency Longer filter life Environmentally friendly

Universal Filters

Maxiflow Light

The raid hp MaxFlow Light have the same performance as car specific MaxFlow Kits and are technically the same. The Max Flow Light replaces the standard airbox too. The difference is, you have to combine the individual parts yourself to suit your individual car: The MaxFlow Filter Element, Universal Bracket, Cold air induction hoses and finally the Connection Kit.

Jetstream Filters

Our Jet-Stream filters have the aluminium ram-pipe neck as with the CR range but also the addition of an integral inverted cone. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces un-necessary turbulence.

Universal Filter Elements

Direct Intake Four high performance air filters with an internal and external cage - the ultimate in engine protection. Each filter is supplied with a rubber reducing ring to take the neck diameter down by 10 mm. E.g.90 mm can become 80 mm, or an adapter as nessessary. Ideal for cars where space is a premium. Remote Intake The ram-pipe filter assemblies are based upon a spun aluminium trumpet designed to fit flexible air intake ducts (and in some cases directly to the air intake) and are suitable for a wide range of vehicle applications. The advanced bell-mouth design ensures increased airflow by directing it and minimising turbulence. This concept in air induction is ideally suited to turbo engines.

Special Filters

Carburettor  Direct Bolt On and Sock Filters

The family of filters and filter kits designed to fit directly to the carburettors of normally aspirated engines - either in the form of filter elements attached to baseplates, which bolt to the carburettor body, or as socks which slip over carb. trumpets.

CS Series Sock Filters

The CS-Series are a simple, low-cost solution in situations where space is at a premium. They are designed to give an interference fit directly over the induction trumpets of a Weber type carb, and are manufactured in the single choke (CS1-) or double choke (CS2-) style.

RS-Series Single Carburettor Filter Kits

RS- Series Single Used widely in both competition and street applications. The element is of sturdy construction, supported by a stainless steel cage and provides maximum surface area to optimise the airflow for induction ramming. The range of baseplates are cut for a variety of wellknown carburettor types. RT- Series Twin The RT-Series filters are twin-carb variants on the RS-Series. As with the single carb. series, the baseplates are cut to fit a range of carburettors and the apertures aligned for standard twin-carb. applications. Element construction is identical to the RS-Series.

Please call us on 01844 292525 if you cannot see what you want