You are here: Road Cars » Exhausts » Tail Pipes

XTJ3734: Round Bent Downwards Circular pipe, bent downward, bright chrome Dimensions: 48 × 160 mm Fitting range: 30-45 mm XTJ3718: Slash Cut Square Square pipe, cut at an angle, bright chrome. Dimensions: 70 × 57 × 145 mm Fitting range: 30-50 mm XTJ3736: Round Bent Downwards Circular pipe, bent downward, bright chrome Dimensions: 54 × 160 mm Fitting range: 40-52 mm XTJ3722: Slash Cut Round Circular pipe, 12° upwards angle, bright chrome. Dimensions: 72 × 155 mm Fitting range: 30-55 mm XTJ3910: Oval Slash Cut Oval pipe, bright chrome. Dimensions: 82 × 67 × 150 mm Fitting range: 38-55 mm XTJ3731: Twin Slash Cut Twin pipes, circular, cut at an angle, bright chrome. Dimensions: 57 × 57 × 180 mm Fitting range: 30-50 mm XTJ3912: Oval Slash Cut Oval pipe, bright chrome. Dimensions: 95 × 72 × 145 mm Fitting range: 41-58 mm XTJ3733: Twin Round Twin pipes, circular, bright chrome. Dimensions: 57 × 57 × 170 mm Fitting range: 30-50 mm

Chrome

XTJ3918 : Round Circular pipe, bright chrome Dimensions: 72 × 145 mm Fitting range: 35-52 mm XTJ3920 : Round Circular pipe, bright chrome Dimensions: 85 × 145 mm Fitting range: 45-61 mm XTJ3922 : Oval Oval pipe, bright chrome Dimensions: 82 × 67 × 145 mm Fitting range: 35-52 mm XTJ3924 : Oval Oval pipe, bright chrome Dimensions: 95 × 72 × 143 mm Fitting range: 50-68 mm

Stainless Steel

XTJ4010 : Round Circular pipe, stainless steel, bright chrome Dimensions: 72 × 140 mm Fitting range: 48-55 mm XTJ4012 / XTJ4018: Round Circular pipe, stainless steel, bright chrome Dimensions: 80 × 140 mm Fitting range: 52 - 58 mm XTJ4014: Oval Oval pipe, stainless steel, bright chrome Dimensions: 68 × 101 × 140 mm Fitting range: 48 - 54 mm XTJ4016: Oval Ellipse Ellipse shaped pipe, stainless steel, bright chrome Dimensions: 64 × 117 × 132 mm Fitting range: 48 - 54 mm

Oval

6" × 4" Oval Small Oval

Round

4" Round 3.5" Round

Twin

3" DTM Twin 3.5" Round

Through comprehensive flow analysis, dyno testing and tuning HKS are able to maximise horsepower gains throughout a broad powerband while also maintaining reasonable sound levels for road use. HKS exhaust systems that are designed for road use retain all factory emission equipment. All HKS exhaust systems are vehicle specific. Each engine and chassis configuration is individually analysed to ensure each vehicle is specifically catered for.

Super Drager

The HKS Super Drager is designed for turbo charged and normally aspirated vehicles. Super Drager Exhaust systems incorporate a polished seamless-shell stainless-steel muffler assembly. All Drager systems utilize mandrel bent piping from 60 to 95mm in diameter and a 106 or 130mm Drager tip, depending on the application. Available for Mitsubishi, Nissan, Toyota Single Outlet LH from £545.00 Twin Outlet from £775.00

Dual Drager

Limited Availability From £545.00